-
-
Viking® HL495 Internal Gear Pump
This Viking® HL495 is in excellent condition. The casing, rotor, and idler are cast iron, the shaft is steel, and the idler pin is hard steel. The idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application. -
Viking® HL624 Internal Gear Pump
This HL624 gear pump is in near perfect condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. It has a coated stainless idler pin, with ceramic idler bushing and a bronze bracket bushing (standard factory configuration.) However, different part materials are available if needed. -
Viking® HL724 Gear Pump
This stainless Viking® HL724 is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The casing, rotor/shaft and idler and pin are stainless, idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application requirements. -
Viking® HL75 Internal Gear Pump
This Viking® HL75 is in excellent condition, very clean inside and out. The bore size on this unit is 7/8". Individual parts can be changed or reconfigured to fit your needs. This pump is ready to go to work for you! -
Viking® HL8124A Internal Gear Pump
This Viking® HL8124A is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® HL895 Internal Gear Pump
This HL895 gear pump is in excellent condition. Never used. Relief valve included. It has a hard steel idler pin, with carbon graphite idler bushing and bracket bushing. However, different part materials are available if needed. -
Viking® K123A Internal Gear Pump
This Viking® K123A is in good condition, clean inside and out. The idler pin is hard steel, idler and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® K124A Internal Gear Pump
This Viking® K124A is in good condition, clean inside and out. Never used but it shows some signs of shelf wear. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® K125 Internal Gear Pump
This Viking® K125 is in great condition, clean inside and out. Never used but it shows some signs of shelf wear. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® K127A Internal Gear Pump
This K127A gear pump is rebuilt in excellent condition. All parts have been closely inspected and confirmed within factory clearances. Individual parts can be swapped out as needed to fit your application requirements. -
Viking® K224A Internal Gear Pump
This Viking® K224A is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® K32 Internal Gear Pump
This K32 gear pump is in great condition, clean inside. It has a hard steel idler pin, with carbon graphite idler bushing and bracket bushing. However, different part materials are available if needed. -
Viking® K4123 Internal Gear Pump
This Viking® K4123 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® K4124A Internal Gear Pump
This Viking® K4124A is in good condition, clean inside and out. Never used but it shows some signs of shelf wear. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® K4124B Internal Gear Pump
This K4124B gear pump is in excellent condition, very clean inside and out. This pump is new surplus and ready for service. Individual parts can be swapped as needed to fit your application requirements. Don't forget to ask about full packages! -
Viking® K4125 Internal Gear Pump
This Viking® K4125 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® K4225 Internal Gear Pump
This K4225 gear pump is in great condition. It has a steel shaft, hard steel idler pin, and carbon graphite idler and bracket bushings. However, different part materials are available if needed. -
Viking® K4625 Internal Gear Pump
This K4625 gear pump is new surplus in excellent condition. Different part materials are available if needed. -
Viking® K4724 Internal Gear Pump
This Viking® K4724 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® K4925 Internal Gear Pump
This Viking® K4925 is in great condition, clean inside and out. Never used but it shows some signs of shelf wear. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® K724 Internal Gear Pump
This Viking® K724 is in excellent condition, clean inside and out. This pump will perform same as factory new. The casing, rotor/shaft and idler are stainless and the idler and bracket bushing are carbon graphite. Individual parts can be changed to fit your needs. -
Viking® K724 Internal Gear Pump
This Viking® K724 is in excellent condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. Individual parts can be changed to fit your needs. -
Viking® KK124A Internal Gear Pump
This Viking® KK124A is in excellent condition, clean inside and out. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® KK125 Internal Gear Pump
This Viking® KK125 is in excellent condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. Individual parts can be changed to fit your needs. -
Viking® KK125 Internal Gear Pump
This Viking® KK125 is in great condition, clean inside and out. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® KK125 Internal Gear Pump
This Viking® KK125 is in great condition, clean inside and out. Never used but it shows some signs of shelf wear. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® KK127A Internal Gear Pump
This Viking® KK127A is in excellent condition. Different material parts can be used depending on the needs of your application. -
Viking® KK225
This motor speed Viking® KK225 is in excellent condition. Never used. It has a hard steel idler pin with carbon graphite idler and bracket bushings, however individual parts can be changed to fit your requirements. -
Viking® KK288 Internal Gear Pump
This KK288 gear pump is in excellent condition, very clean inside and out. This pump is new surplus and ready for service. The idler bushing and bracket bushing are bronze. However, individual parts can be swapped as needed to fit your application requirements. -
Viking® KK32 Gear Pump
This Viking® KK32 has never been used and is in excellent condition. Depending on your requirements, individual parts can be swapped as needed. This is a great pump and is ready to go to work for you! -
Viking® KK4123 Internal Gear Pump
This KK4123 gear pump is rebuilt in good condition. All parts have been closely inspected and confirmed within factory clearances. It’s a great pump ready to go into service! -
Viking® KK4124A Internal Gear Pump
This KK4124A gear pump is in excellent condition, very clean inside and out. This pump is new surplus and ready for service. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application requirements. -
Viking® KK4124B Internal Gear Pump
This KK4124B gear pump is in excellent condition, very clean inside and out. This pump is new surplus and ready for service. Individual parts can be swapped as needed to fit your application requirements. Don't forget to ask about full packages! -
Viking® KK4124R Internal Gear Pump
This KK4124R gear pump is in great condition, clean inside with only a few minor signs of shelf wear. Never used. This particular pump model name is obsolete, the new model is 4124A (Universal Seal) as all parts are interchangeable. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application requirements. -
Viking® KK4125 Internal Gear Pump
This Viking® KK4125 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® KK4724 Internal Gear Pump
This stainless Viking® KK4724 is in great condition, very clean inside and out. Never used. The casing, rotor, shaft and idler pin are stainless and the idler bushing and bracket bushing are carbon graphite. However, we can swap out any individual parts to fit your application. -
Viking® KK724 Internal Gear Pump
This stainless Viking® KK724 is in great condition, very clean inside and out. Never used. The casing, rotor, and idler pin are stainless and the idler bushing and bracket bushing are carbon graphite. However, we can swap out any individual parts to fit your application. -
Viking® KK8127A Internal Gear Pump
This Viking KK8127A Mag Drive pump is in excellent condition and ready to go into service! This stainless steel pump is fitted with carbon graphite bushings but can be customized to fit your application requirements. We can also add the drive motor and/or gear reducer as needed! -
Viking® KV1705-9436-0153 Gear Pump
This stainless Viking® KV1705-9436-0153 is in great condition, clean inside and out. Never used. The casing and shaft are steel The rotor, idler, and pin are hard steel, and the idler bushing and bracket bushing are bronze. However, individual parts can be swapped as needed to fit your application requirements. -
Viking® KV1706 Gear Pump
This KV1706 gear pump is in fantastic condition, clean inside and out. Contact us to swap out parts for your specific needs. -
Viking® L124 Internal Gear Pump
This L124 gear pump is in good condition, clean inside and out. Never used. The casing is cast iron, however, individual parts can be swapped as needed to fit your application requirements. -
Viking® L124A Internal Gear Pump
This Viking® L124A is in excellent condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. Individual parts can be changed to fit your needs. -
Viking® L124A Internal Gear Pump
This Viking® L124A is in excellent condition. Individual parts can be changed to fit the needs of your specific application. -
Viking® L125 Internal Gear Pump
This Viking® L125 is in great condition, clean inside and out. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® L4124 Internal Gear Pump
This Viking® L4124 is in good condition, clean inside and out. The idler pin is hard steel, bushing and bracket bushing are carbon graphite. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® L4124B Internal Gear Pump
This Viking® L4124B is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® L4125 Internal Gear Pump
This L4125 gear pump is in great condition. It has a steel shaft, hard steel idler pin, and carbon graphite idler and bracket bushings. However, different part materials are available if needed. -
Viking® L4225 Internal Gear Pump
This Viking® L4225 is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The casing, rotor and idler and cast iron and the shaft is steel and the idler pin is hard steel. The idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application. -
Viking® L4624B Internal Gear Pump
This L4624B gear pump is new surplus in excellent condition. Different part materials are available if needed. -
Viking® L4625 Internal Gear Pump
This L4625 gear pump is new surplus in excellent condition. Part materials can be changed to meet your application needs. -
Viking® L4724 Internal Gear Pump
This stainless Viking® L4724 is in great condition, very clean inside and out. Never used. The casing, rotor, shaft and idler pin are stainless and the idler bushing and bracket bushing are carbon graphite. However, we can swap out any individual parts to fit your application. -
Viking® L724 Internal Gear Pump
This Viking® L724 is in excellent condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. Individual parts can be changed to fit your needs. -
Viking® L724R Internal Gear Pump
This Viking® L724R is in excellent condition. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. Individual parts can be changed to fit your needs. -
Viking® L8124A Internal Gear Pump
This L8124A gear pump is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The casing, rotor, and idler are cast iron, however, individual parts can be swapped as needed to fit your application requirements. -
Viking® LL125 Internal Gear Pump
This Viking® LL125 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® LL127A Internal Gear Pump
This LL127A gear pump is new surplus, in good condition, and clean inside and out. The rotor, idler, and shaft are stainless steel, the idler pin is coated stainless, with carbon graphite idler bushing and bracket bushing. However, different part materials are available if needed. -
Viking® LL32 Internal Gear Pump
This LL32 gear pump is new surplus in great condition. Parts can be swapped out to meet your specifications. This pump is ready to go to work for you! -
Viking® LL4124 Internal Gear Pump
This LL4124 gear pump is in good condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The rotor, and idler are cast iron, the shaft is steel and the idler pin is hard steel. The idler bushing and bracket bushing are bronze . However, different part materials are available if needed. -
Viking® LL4124A Internal Gear Pump
This LL4124A is in excellent condition, clean inside and out. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® LL4127A Internal Gear Pump
This stainless Viking® LL4127A is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The casing, shaft, rotor, and idler pin are stainless and the idler bushing and bracket bushing are carbon graphite. However, we can swap out any individual parts to fit your application. This pump does not include a relief valve, but one can always be added! -
Viking® LL4625 Internal Gear Pump
This LL4625 gear pump is in great condition, very clean inside and out. Never used. Relief valve included. It has a cast iron casing, with tungsten idler bushing and carbon graphite bracket bushing. However, different part materials are available if needed. -
Viking® LL4925 Internal Gear Pump
This Viking® LL4925 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® LL724 Internal Gear Pump
This stainless Viking® LL724 is in great condition, very clean inside and out. Never used. The casing, shaft, rotor, and idler pin are stainless and the idler bushing and bracket bushing are carbon graphite. However, we can swap out any individual parts to fit your application. This pump can have a relief valve added, or it can be shipped with a plain head. -
Viking® LL8127A Internal Gear Pump
This LL8127A gear pump is rebuilt in great condition. All parts have been closely inspected and confirmed within factory clearances. Part materials can be swapped out to fit your application. -
Viking® LQ124A Internal Gear Pump
This Viking® LQ124A is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The idler pin is hard steel, bushing and bracket bushing are bronze. However individual parts can be swapped out as needed to fit your application requirements. -
Viking® LQ125 Internal Gear Pump
This Viking® LQ125 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® LQ32 Internal Gear Pump
This Viking® LQ32 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® LQ4123 Internal Gear Pump
This steel Viking® LQ4123 is new surplus and in excellent condition! The casing and shaft are steel, rotor pin and idler are cast iron, the idler pin is hard steel. The idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application. -
Viking® LQ4124 Internal Gear Pump
This Viking® LQ4124 is in excellent condition, very clean inside and out. Individual parts can be changed to fit your needs. This pump is ready to go to work for you! -
Viking® LQ4125 Internal Gear Pump
This Viking® LQ4125 is new surplus and in good condition! The casing, rotor pin and idler are cast iron, the idler pin is hard steel, and the shaft is steel. The idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application. -
Viking® LQ4625 Internal Gear Pump
This LQ4625 gear pump is in excellent new surplus condition. Different part materials are available if needed. -
Viking® LQ4724 Internal Gear Pump
This stainless Viking® LQ4724 is in excellent condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The casing, rotor/shaft, and idler are stainless, the idler pin is coated stainless, and the idler bushing and bracket bushing are carbon graphite. However, individual parts can be swapped as needed to fit your application. -
Viking® LS224A Internal Gear Pump
This LS224A gear pump is in great condition, very clean inside and out. It is new surplus and has a cast iron casing, rotor, and idler. It includes a hard steel idler pin and carbon graphite idler bushing and bracket bushing. However, different part materials are available if needed. -
Viking® LS4124A Internal Gear Pump
This LS4124A gear pump is in good condition, very clean inside and out. Re-manufactured by our shop, so each part was individually inspected and tested, all clearances and tolerances confirmed within factory allowance. This pump will perform same as factory new. The rotor, and idler are cast iron, the shaft is steel and the idler pin is hard steel. The idler bushing and bracket bushing are bronze. Relief valve attached. However, different part materials are available if needed.
Can't find it online? Ask us to 'Check the Rack!'
We have tens of thousands of pumps and parts on our racks ready-to-ship (and new stuff arriving daily.) It's far too much for our team of helper monkeys to list online. Contact us and we'll check the rack!